- The bulb does not burn at the switched-on emergency brake: check a safety lock (the head the Electrotechnical equipment).
- Dismantle the glow lamp and check it (the beginning of the head).
- If it did not result in success, then bare the switch behind the lever of the parking brake, having dismantled a back part of the average console.
- Disconnect a wire on the switch (behind near the emergency brake) and apply the socket to the bared metal.
- If the bulb burns, the switch is faulty
- The bulb does not die away at the switched-off parking brake: remove a wire on the switch of the emergency brake as it is described above, but leave the socket hanging.
- If the bulb does not burn any more, then faulty/are wrong the switch was mounted.
- But if it continues to burn, then the wire is wiped and will close on weight.
|
|
