Audi A4

since 1994 release

Manual of the car

Audi A4
+ Running gear
- Regular servicing
   Installation in a starting position of the indicator of frequency of maintenance
   Crossing of dates of maintenance
   The plan of maintenance for the motorist
   Diagnostics in the workshop Audi
   Diagnostics of an executive element
   Poll of the database of malfunctions
   Diagnostics as the help to the fan
   Identification of the car
   Safety measures in a workplace
   Jacks
   Lubricant of all details
   Check of level of oil
   Oil consumption
   The choice of oil with the correct specification
   Viscosity of oil
   Correctly picked up engine oil for Audi
   Replacement of engine oil and oil filter
   Check of level of liquid in system of a servoupravleniye
   Check of level of oil in the mechanical transmission
   Check of level of oil in the drive of the back bridge
   Control of the ATF level in the automatic transmission
   Check of level of oil in the main transfer of the automatic transmission
   ATF replacement
   Lubricant of drafts, hinges and locks
+ Engines
+ Turbo-supercharging
+ System of an exhaust
+ Cooling system
+ Fuel tank and fuel pump
+ Air filter and channels of absorption
+ System of injection
+ Coupling
+ Transmission and main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tires
+ Electrotechnical equipment
+ System of ignition
+ Lighting
+ Alarm equipment
+ Tools and devices
+ Heating and ventilation
+ Body details
+ Salon
Search of malfunctions
Technical characteristics

Check of level of liquid in system of a servoupravleniye

Liquid level has to be measured in a tank of a servoupravleniye (2) at the working engine. For this purpose unscrew a cover (1) of a tank and look at the probe. Shooters showed tags.

Constant control

PERFORMANCE ORDER

For check of level of liquid start the engine idling.
Put a wheel directly.
Unscrew a cover (carefully, a spring), wipe the probe a pure napkin, without screwing up, put a cover on a jellied opening. Again uncover and look on the probe what level of liquid. It has to be between marks.
At a dolivaniye level is reported to reach the mark "MAH".
In principle loss of liquid demonstrates leak in hydraulic system. Therefore in that case not just fill in hydraulic oil, and in the beginning find the place of leak!